3 AXLES Side Wall Flatbed SEMI TRAILER 13.70

The side-wall flatbed trailer is one of the most common types of trailers, designed for transporting cargo that does not require protection from environmental factors such as wind and rain. Due to its limited loading height, this type of trailer is an ideal choice for transporting goods that require open space. In some cases, it is also used for carrying containers.

Pouya Khodro Mahan, leveraging modern technology and engineering standards, is recognized as one of the leading manufacturers of side-wall flatbed trailers in the country. The company’s products are highly regarded by drivers and transport companies for their high strength, efficient design, and superior build quality.

Pouya Khodro Mahan’s side-wall flatbed trailers are designed and produced with a 13.70-meter length, three axles, and fold-down side walls, which facilitate the loading and unloading process and allow for the transport of a wide variety of cargo.

Technical Specifications

The chassis and other metal components are made of high-strength steel (S500 MC / ST52-3) using a special semi-automatic CO₂/Argon welding machine (Merkle Technology) , Assembled using a special fixture

Hydraulic System

Floor Covered By 30 mm abrasion resistance plywood with pillar and ratchet holders in appropriate distances

Floor Structure

3×9 tons(27tons) intra disc brake or drum brake, front axle with automatic lifting function, air suspension system with special shock absorber, Automatic and manual height adjustment capability with rotary slide valve, Height limitation system (FOX / SAF)

Axle and Undercarriage

2 speed , Dynamic Capacity 24 tons & Static Capacity 50 tons , operated from the right side, (OMS)

Landing Gear

2×7 and 15 Pole quick release connector, 24 volts system, rear and side light with LED type according to European Standard UNECE R48, E20 and E9, equipped with SMCG (ASPOCK)

Breaking System

Two double acting diaphragm brake chamber for each two rear axles and two single acting diaphragm brake chamber for lifting axle, EBS System (Electronic Brake System) with ABS (Anti-lock Brake System) and RSP (Roll Stability Program) Disc and Drum, park release emergency valve, reset to ride height function, KNORR® / WABCO® (Germany)

Breaking System

2 Inch dia. (152 / 162 KN) with special flange, according to SAE standard

Kingpin

16 side doors and 2 rear doors and front panel, height 950 mm with hooks to tie up curtains on doors

Body Construction

Sand Blasted according to SA2.5

One layer of epoxy primer

and one layer of final polyurethane coating as per customer requirement

Painting

2750 mm	Rear overhang	11500 kg	Kingpin load
2270 mm	Overall height	27000 kg	Axle load
2550 mm	Outside width	7800 kg	Tare weight
2462 mm	Functional width	32000 kg	Payload (semi trailer+load)
13845 mm	Overall length	1150 – 1200 mm	5th wheel height
13610 mm	Functional length	1310 mm	Axle spread
4060 mm	End of chassis to Center of middle axle	7940 mm	Centre of 5th wheel to Center of middle axle

Other Accessories

6 x tubeless radial tires 385/65R22.5
6 x single integrated rims R22.5-11.75
6 Semi-circle mud guards
2 Rear rain Flap according to IR EU 109 standard
Adjustable Rear under-run protection according to UNECE R58 standard
2 wheel chocks with holders
Double Spare Wheel Carrier with special lock